Carbon black powder grinding mill/grinder mill safety instructions

. Read the carbon black grinding mill/grinder mill operating manual carefully.

. HGM ultra fine carbon black grinding mill/grinder mill may only be used for the purposes described in chapter 1.4.1 areas of application.

. We recommend that a safety logbook should be kept in which all work (service, repairs etc.) carried out on the machine should be entered.

. Use only original accessories and original spare parts of carbon black grinding mill/grinder mill. The safety of the machine is impaired if this instruction is not followed.

. Do not continue to use damaged accessories and spare parts.

. Operating personnel must be acquainted with the contents of the operating manual. For this reason it is essential that – among other things – the operating manual is kept near the machine at all times.

. Do not remove instructive labels or signs.

. Do not deactivate safety devices.

. Unauthorised changes to the machine lead to the loss of Clirik’s attestation of conformity to European directives as well as the loss of the warranty.

. Wear ear protection! The noise level is above 65dB(A).

. Operating personnel must always operate the machine with safety in mind.

. When grinding oxidable materials (e.g. metals or coal), there is a risk of instantaneous combustion (dust explosion) if the material exceeds a certain fineness. It is therefore necessary to take special safety precautions when grinding such material and the work must be supervised by a specialized person.

. When grinding electrically conductive materials, the fine may cause short circuiting. It is therefore necessary to take special safety precautions and to pay special attention to cleanliness when grinding such material.

. HGM ultra fine carbon black grinding mill/grinder mill is not explosion protected and is not designed to grind explosive and flammable materials.

. Do not run the ultra fine carbon black grinding mill/grinder mill unsupervised.